Here Is A New Project For You!
This is a step by step "How To" on making drapes from some vintage aprons and clothing pins
You will need the following
- Aprons (I Used Two Apron Per Window) Also Try to Find Aprons That Are the Same Length
- Hammer
- Clothing Pins (I Used Three Clothing Pins on Each Window)
- Finishing Nails
- Drill
First Step
Pull clothing pins apart leaving the spring on one of the haves
Second Step
Drill a small hole in one of all the clothing pins half
Third Step
Hammer one half of the pins to the wall
I used three pins on each window, one on each end and one in the middle of the window to hold on to that "clothing line" look
Tip One
I found that drilling the hole in the half that still has the spring attached helped when it came to putting the pin back together once its been nailed to the wall
Tip Two
I also found that drilling the hole before nailing the pins helped it from splitting the wood with the nail
Put the clothing pin back together
Fourth Step
Tie aprons together
Final Step
Hand Aprons!
Find Vintage Aprons Here!
Just Click!
No comments:
Post a Comment